Operation Quantron E
57
4
Manual Operation (MAN km/h)
1. Switch from the Hopper configuration menu to the AUTO/MAN operation
menu.
2. Highlight the MAN km/h selection field.
The Forward speed menu is displayed.
3. Input the value for the forward speed during spreading. Confirm the input by
pressing the Enter key.
4. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the main menu.
Manual Operation Scale (MAN Scale)
1. Switch from the Hopper configuration menu to the AUTO/MAN operation
menu.
2. Highlight the MAN scale selection field.
The slide opening menu is displayed.
3. Input the scale value for the metering side opening. Confirm the input by pres-
sing the Enter key.
Input of values into the operator panel is described in section 4.9.2:
Input of
values using the cursor keys, page 76.
4. Press the ESC key to return to the previous menu.
or
Press the Menu key to return to the Operating Screen.
NOTICE
The specified operating mode is displayed in the operating screen.
NOTICE
For an optimum spreading result in manual mode as well, we recommend using
the values for metering slide opening and ground speed in the fertiliser chart.
NOTICE
The specified operating mode is displayed in the operating screen.
To Next Page
Loading...