Rauch quantron e User Manual

Operation Quantron E
73
4
The consequences of importing the operating data are as follows:
 All operating data currently stored in the Quantron E is overwritten.
 If you have defined the application rate on the PC, the application rate is au-
tomatically transferred and immediately activated in the fertiliser settings
menu.
 If you enter an application rate outside the range 10-3000, the value in the fer-
tiliser settings menu is not overwritten.
Exporting operating data (Quantron E to PC)
Requirements:
 Use the data stick supplied.
 Do not alter the directory structure on the data stick.
1. Switch from the System/Test menu to the Data transmission submenu.
2. Switch to the Operating data submenu.
3. Highlight the Export field.
4. Press the Enter key.
 The bar indicates the progress of the transmission.
Figure 4.42:Export progress
The consequences of importing the operating data are as follows:
 All operating data currently stored in the Quantron E is overwritten.
 If you have defined the application rate on the PC, the application rate is au-
tomatically transferred and immediately activated in the fertiliser settings
menu.
 If you enter an application rate outside the range 10-3000, the value in the fer-
tiliser settings menu is not overwritten.

Rauch quantron e Specifications

General

Brand	Rauch
Model	quantron e
Category	Controller
Language	English