Alarm messages and possible causes 5
80
Acknowledging alarm message:
1. Proceed as described in the previous paragraph.
2. Switch the control unit Quantron E off (ON/OFF) and then restart it.
3. Switch to the Weigh Quantity menu using the kg button.
4. Select the function New fertiliser.
5. Press the Enter key.
The flow factor is set to 1.0 and the remaining fertiliser volume in the
hopper is weighed.
6. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the Operating Screen.
7. Switch to the Operating Screen.
The weighed volume appears on the display field.
The error is cleared and the spreading process can continue.
A new flow factor regulation process takes place.
n CAUTION
Possible spreading error
This alarm message can lead to spreading errors which have a
negative impact on the environment.
Immediately stop the spreading process.
To Next Page
Loading...