Index
Manual No. 016-0171-122 Rev. E 71
E
Electrical
Safety
2
H
Hydraulic
Fittings
4
Safety 2
Hydraulic System Installation 23
Building the UltraGlide XT Valve Assembly 26
Hydraulic Schematic 35
Installing Fittings in the UltraGlide XT Valve 25
Installing the Cylinder Hoses 31
Installing the Pressure and Tank Hoses 27
Installing the UltraGlide XT Cylinder 29
Mounting the AutoBoom Valve (If Applicable) 24
Mounting the UltraGlide XT Valve Assembly 26
I
Important Safety Information 1
Electrical 2
Hydraulics 2
Installation
Model Year 2012 & Newer - RG Series
Installing the Valve Harness
Connecting the Valve Harness to the
Sensors - UltraGlide Installed
on the Machine (If
Applicable) 49
Introduction
AutoBoom UltraGlide and UltraGlide XT Kit
Contents
6
Model Year 2009 6
Model Years 2010-2011 11
Updates 4
P
Point of Reference 4
Preparing for Installation 3
R
Recommendations 4
Replacement Parts 67
Sensors 70
Valves 68
S
Sensor Installation 37
Installing the Rotary Sensor 42
Installing the Sensors
UltraGlide Installed on the Machine
Mounting the Boom Sensors 40
UltraGlide Not Installed on the Machine 38
Installing the Boom Sensors 38
Installing the Center Sensor
120’ Booms 39, 41
90’-100’ Booms 39, 41
Installing the Center Sensors 39, 40
Installing the UltraGlide XT Boom Sensors 37
Boom Sensor Mounting Locations 37
Startup Procedures 65
Calibrating the AutoBoom UltraGlide XT System 66
Verifying the AutoBoom Hydraulic System
Installation
65
Verifying the UltraGlide XT Wiring 65
T
Tools Needed 4
U
UltraGlide
Install
Wiring
Connecting the Harness Cable to the
Controller Cable 57
W
Wiring Installation 45
Installing the UltraGlide XT Auxiliary Sensor Cable 58
Node & Harness Installation
Model Year 2009
Connecting the CAN/Power Cables -
Gen I Cable Only
57
Connecting the Harness Cable to the
Implement Extension Tee -
Gen II Cable Only
58
Connecting the Harness Cable to the
Sensors
56
Connecting the Harness Cabpe to the
Powr Cable - Gen I Cable
Only
57
Connecting the Harness to the Boom
Function Controls 54