Index
72 Viper Pro Installation & Operation Manual
Connecting the Power Leads - Gen I
Cable Only 58
Installing the Center Rack Control 55
Installing the Node and Harness 54
Installing the UltraGlide XT Node 54
Model Year 2010-2011 - 9X4(H). 11X4(H), and
13X6 Series 50
Connecting the Sensor Cables 52
Installing the Node and Node
Harness 50
Installing the POwer/CAN Cable 52
INstalling the Valve Harness 51
Model Year 2012 & Newer - RG Series 45
Installing the Node Harness 45
Installing the UltraGlide XT Node 47
Installing the Valve Harness 48
Connecting the Valve Harness to
the Sensors - UltraGlide
Not Installed on the
Machine 49
Wiring Connections 45
Wiring Diagram 60
To Next Page
Loading...
