APPENDIX
F
: Wireless Section Control Remote Operation 129
APPENDIX F
REMOTE CONTROL AND
DIAGNOSTICS
WIRELESS SECTION CONTROL REMOTE OPERATION
Refer to the Section Control Remote 2.0 Operation Guide (P/N 016-0171-685) for assistance with using the Section
Control Remote 2.0 (P/N 063-0174-002).
To enable communication with the RCM-S ECU:
1. Open the UT Menu and select the RCM - Sprayer Menu button.
2. Select the Tools Menu softkey along the right side of the display.
3. Select the System Settings tab along the top of the display.
4. Use the Wireless Control Mode drop-down and select the Section or NCV option.
FIGURE 1. Enable Wireless
RCM - Sprayer Menu Tools Menu System
Settings
UT Menu
User Settings
To Next Page
Loading...