Raven Command FLEX II - Chapter 9 Troubleshooting; RCM - Sprayer Status LED

CHAPTER
9
Troubleshooting: RCM - Sprayer Status LED 85
CHAPTER 9 TROUBLESHOOTING
RCM - SPRAYER STATUS LED
There are four LEDs on the front of the ECU. Each LED color and flash rate indicates different information as
detailed in the table below. If multiple states are true for a given LED the first active state listed in the table will be
the state displayed. After addressing the displayed state (if needed), the next LED state will be indicated.
FIGURE 1. RCM - Sprayer LEDs
A
B
C
Power