Raven ISO Product Controller II User Manual

P/N 016-0171-584-H 121
This list will show all of the supported Product
Controller II ECU Wireless IDs the mobile device
has detected.
Select the desired Product Controller II ECU
Wireless ID (the wireless ID can be found on the
System Information screen on the PC II CT) and
enter the passcode. The passcode will display
on the UT screen. If the Product Controller II
ECU Wireless ID has already been connected, no
passcode is required and the application will
automatically switch to the next page.
NOTE: Only one Product Controller II ECU can
be connected at a time. The Product Controller
II ECU wireless ID will not show up if it is
connected to another mobile device.
NOTE: Selecting Demo Device will open the
application in demo mode and not connect to a
Product Controller II ECU. This mode is for
exploring the mobile application.

Raven ISO Product Controller II Specifications

General

Brand	Raven
Model	ISO Product Controller II
Category	Controller
Language	English