Raven ISO Product Controller II - Chapter 6 Tally Registers

CHAPTER
6
P/N 016-0171-584-H 51
CHAPTER 6 TALLY REGISTERS
USING TALLY REGISTERS
To access the Hawkeye
®
tally registers prompt:
1. Open the UT Menu and select the Hawkeye
®
Menu button.
2. From the home screen, select the Tally Registers softkey along the right side of the display.
RESETTING A REGISTER
To reset a register:
1. Open the UT Menu and select the Hawkeye
®
Menu button.
2. From the home screen, select the Tally Registers softkey along the right side of the display.
3. On the Totals Data tab, select the Reset button for the register to be reset.
4. Accept the confirmation prompt to reset the select register.
5. Repeat the above process to reset other tally registers as desired.
Hawkeye Menu
Tally
Registers
UT Menu
Tally
Registers
Reset
Register
UT Menu
Hawkeye Menu