Raven ISO Product Controller II - Calibration Reference Sheet

: Calibration Reference Sheet v
CALIBRATION REFERENCE SHEET
Record settings and calibration values used when programming the system in the fields below and keep this sheet
for future reference.
GENERAL IMPLEMENT INFORMATION
TANK FILL SETTINGS
PRODUCT CONTROL SETTINGS
UNITS
US (Acres) SI (Hectares)
Nozzle
Spacing
Boom Offset
Speed
Cal
Tip Size Boom
Section Widths (Boom Cal)
1. 5. 9. 13.
2. 6. 10. 14.
3. 7. 11. 15.
4. 8. 12. 16.
Tank
Capacity
Low Tank
Limit
Fill
Flowmeter
Cal
Units
Min. Pump
PWM
Max. Pump
PWM
Standby
Pump PWM
Pump PWM
Frequency
Minimum
Nozzle
PWM
Meter Cal
Units
Response
Sensitivity
Deadband