Raven ISO Product Controller II User Manual

P/N 016-0171-584-H 39
HAWKEYE® NOZZLE CONTROL AND SIDEKICK PRO ICD SETUP
WIRELESS ID
Displays the internal wireless module ID. This value will be displayed on the wireless diagnostics
application when trying to connect to Hawkeye
®
Product Controller II ECU.
RESET DEFAULTS
Select the reset defaults button to restore the default system settings. All user settings will be reset and the initial
calibration wizard must be completed before operating the Hawkeye
®
nozzle control system.
NOTE: Prior to performing a software update, record all settings in the “Calibration Reference Sheet” on
page v. After the update is complete, reset the system defaults and recalibrate the system.
FEATURE UNLOCKS
Unlocks allow the user to activate features through the use of an activation key. Unlocked features are visible on
the feature unlock screen. Contact a Raven dealer for information on acquiring feature unlocks.
SERVICE MENU
Provides advanced features and options to assist with systems diagnostics or tuning the Hawkeye
®
nozzle control
system. The service menu should only be used by a trained Raven service technician.
Contact a local Raven dealer for assistance with the Hawkeye
®
nozzle control system if necessary.

Raven ISO Product Controller II Specifications

General

Brand	Raven
Model	ISO Product Controller II
Category	Controller
Language	English