Chapter 2
6 Sidekick Pro Installation & Operation Manual
System Diagnostics
Enhanced diagnostic features are monitored by the control console during operation of the Sidekick Pro
injection system to help identify potential issues and minimize equipment down time. Refer to Chapter 5,
Setting Application Mode and Injection Diagnostics for more information on using diagnostics features on a
specific console.
Flow Monitoring
The CAN integrated Sidekick Pro offers enhanced monitoring of pump operation during chemical injection
applications to alert the operator to conditions such as an empty chemical supply tank, low injection pressure,
incorrect meter calibration, or issues with the injection pump valves.
Sidekick Pro Pump Specifications
The Raven Sidekick Pro injection pump is a positive displacement, variable speed piston pump used for direct
chemical injection applications.
Dimensions (See Figure 3 on page 7 or Figure 4 on page 8)
Pistons 1 @ 0.750” Dia.
Maximum Stroke Length 0.390”
Flow Output Range
P/N 063-0173-081
5-200 oz./min.
[1.5-59 dl/min.]
P/N 063-0173-103
1-40 oz./min.
[0.3-11.8 dl/min.]
Maximum Operating Pressure 150 psi
Maximum Power Required 1/4 HP
Maximum Recommended Suction Lift 2 ft.
Inlet and Outlet Plumbing Mates with Banjo M100 Flange and 3/4” Female NPT
Wetted Parts Polypropylene Stainless Steel
Body Material Polypropylene
Wetted Seals/O-Rings V965-80 Viton and Graphite Filled Teflon
To Next Page
Loading...
