Chapter 5
38 Sidekick Pro Installation & Operation Manual
Envizio Pro
Note: Raven Sidekick Pro injection pumps (P/N 063-0173-081 or 063-0173-103) are equipped with
diagnostic and flow monitoring features for CANbus control consoles. To access complete
diagnostic capabilities for the Sidekick Pro injection system, the Envizio Pro must have software
version 2.3.0.3 or newer. Software updates for the control console may be downloaded from the
Raven Applied Technology Division web site:
http://www.ravenprecision.com/Support/Software/index2.jsp
Application Mode Setup
1. Touch the “Tools Menu” icon on the Envizio Pro Home screen.
2. Select the “Product Control” icon within the System menu and touch the “Feature Settings” button to display
the following screen.
3. The Vacuum/Bin Alarm is enabled by default when a motor control node is detected on the CANbus.
Deselect this option to disable the audible alarm for injected products.
4. When enabled, the Agitator option will send power to an agitator motor via the CAN motor control cable.
See Figure 11 on page 21.
To Next Page
Loading...
