Chapter 3
12 Sidekick Pro Installation & Operation Manual
FIGURE 4. Pressure Drop vs. Flow Rate
Mount the Sidekick Pro Pump and Chemical
Tank
Installation and mounting of the Sidekick Pro injection pump and injection module, or chemical tank,will vary
between implements. Use the following sections to help select an appropriate mounting location on the
implement.
Mount the Injection Module
The Raven Sidekick Pro injection module provides a platform for mounting the chemical supply tank and
Sidekick Pro injection pump in the optimal configuration for pump operation.
Note: The Raven Sidekick Pro injection module may be ordered with a 24 gallon chemical supply tank or
without a chemical tank to connect the injection system with an existing tank on the vehicle or
purchased separately.
2” Check Valve and 2” Mixer
3” Check Valve and 3” Mixer
3” Check Valve and 4” Mixer
Flow Rate
Gal./min. [L/min.]
Pressure Drop
(PSI [kPa]
To Next Page
Loading...
