SmarTrax & QuickTrax Operation Manual
30
Driving Device
The Driving Device screen displays the driving device of the machine you
are using (Hydraulic or QuickTrax). This is a display only.
Sensor Type
The Sensor Type screen displays the type of sensor for which SmarTrax is
currently calibrated. This is a display only.
Note: If ‘Yaw’ is selected on this screen, the Left, Center,
and Right SPS Calibration screens will not appear in the
Advanced Menu as these screens are not used for Yaw
Sensor operation.
To Next Page
Loading...
Need help?
General
