Parent Approved Use the up and down arrows to
choose whether the channel indicated should be shown
When:l:he Paren_tal •control feature is turned on. Select YES
to indicate that, the channel can be shown at any time,
/,i_-regardless of whether Parental Control is turned on. Select
,-_NO to indicate thatthe front panel cannot tune to that
:,_ _hannel when Parental Control is turned on. Important:
.: ,-Y0 u must turn on the Parental Control feature ON in the
,_" Parental Control control panel (see above).
AutoChannel Search Displays a control panel that lets you
re!! the TV to search automatically for all the channels
available through the antenna input(s). When the TV finds an
active channel, it places it in the channel list; inactive
channels (weak stations or channels with no signal at all) will
be removed from the channel list.
Auto Tuning Displays a choice list that lets you set up TV to
automatically tune to the correct input channel when you
press VCR1, VCR2.LD, or DSS.CABLE.
Set VCR 1Channel Displays a choice list that lets you
select the channel that the TV tunes to when you press
the VCR1 button. The choices are:
Not Connected Choose this if you do not have a VCR
connected to an antenna or Video input on the back of
the TV, or if you don't want the TV to tune to a channel
when the VCR1 button is pressed.
Channel 3 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV to tune to channel 3 when you press
the VCR1 button. Reminder: Make sure the component's
Ch 3/4 switch isset to channel 3.
Channel 4 Antenna A Choose this if your VCR is
connected to the Antenna A jack on the back of the TV,
and you want the TV to tune to channel 4 when you press
the VCR1 button. Reminder: Make Sure the component's
Ch 3/4 Switch is set to channel 4.
Video 1 Input Choose this if your VCR is connected to
the Video I jacks on the back of the TV and you want the
TV to tune to Video I input when you press the VCR1
button.
Video 2 Input Choose this if your VCR is connected to
_the Video 2 jacks on the back 0f,the TV and you want the
Tvto tune to Video 2 input when you press the VCR1
button .........
I Auto Tuning is part of the 51
•interactive setup routine. For
more, see Interactive Setup, p. 1
43
To Next Page
Loading...
