CONN ECTI NG AUDIO COMPON ENTS
,CONNECTING A STEREO AMPLIFIER
I.
:2.
Connect the amplifier's TV audio inputs to the left (L/
MONO) and right (R) HI-FI OUTPUT jacks.
You may prefer to turn off the TV's internal speakers by
selecting Speakers from the Audio menu, then turning the
speakers off.
If your audioamplifier is part of a system that uses its own
remote control, you may prefer to connect it to the TV
using the Fixed Output jacks.
Important: Do not use the amplifier's PHONO inputs. If
the amplifier is not stereo, use the L/MONO HI-FI OUT
jac k. Consult the amplifier's owner's manual for the
manufacturer's recommended hookup.
CONNECTING A TAPE DECK
To use a tape deck to record audio from TV:
1. Connect the tape deck's audio inputs to the FIXED
OUTPUT jacks on the back of the TV.
The FIXED OUTPUT jacks provide
a fixed level audio signal,
•making them ideal for audio
recording, or for use with an
audio amplifier that has its own
remote control. No matter how
the volume changes on the TV,
the output volume stays the
same.
69
To Next Page
Loading...
