To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

The table below describes the Playback controls.

# CONTROL DESCRIPTION

1 Clips View clips as thumbnails

2 Load Previous Clip Loads the previous clip in the playlist.

3 Frame-by-Frame Reverse Moves through the clip frame-by-frame in reverse.

4 Reverse Play/Pause toggle Plays clip in reverse, and toggles between play and pause.

5 Play/Pause toggle Toggles between play and pause.

6 Frame-by-Frame Forward Moves through the clip frame-by-frame.

7 Load Next Clip Loads the next clip in the playlist.

8 Play Options Displays the following subset of options: Play Once, Loop, Loop Playlist,

and Playback Speed.

9 Play Once Plays clip to the end, and does not repeat the clip.

10 Loop Plays the clip on a loop.

11 Loop Playlist Loops all clips in the playlist. To create a playlist, go to Menu > Playback >

Menu > Media > Playlist, and move clips to the Play List field.

12 Playback Speed Option to select x1, x2, x4, x8, or x16 playback speed.

13 Marker Options Displays the following subset of options: In Point, Remove In/Out Point,

Out Point, Previous Marker, and Next Marker.

14 In Point Sets a red In Point marker in the Playback Status Bar. Use an In Point

marker in conjunction with an Out Point marker to play only a certain

portion of a clip. The In/Out Point markers help when the clip is long and

you want to focus on a particular segment.

15 Remove In/Out Point Removes the In/Out Point markers and skips to the end of the clip.

16 Out Point Sets a red Out Point marker in the Playback Status Bar. Use an Out

Point marker in conjunction with an In Point marker to play only a certain

portion of a clip. The In/Out Point markers help when the clip is long and

you want to focus on a particular segment.

17 Previous Marker Goes to the previous marked frame, which displays as a red line in the

Playback Status Bar. Disabled when there are no marked frames.

18 Next Marker Goes to the next marked frame, which displays as a red line in the

Playback Status Bar. Disabled when there are no marked frames.

1. Thumbnail view is only available on an EPIC DRAGON or SCARLET DRAGON. On MYSTERIUM-X cameras, a logo appears instead of a

thumbnail.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General