To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

WIDTH/HEIGHT

The Width/Height fields replace the Scale field when you select Absolute from the Mode drop-down menu.

Select the values for the width and height of the guide in pixels.

OFFSET X/Y

Percentage to offset guide from its default centered position. Available range is 0–100%.

 100%: Right-aligned (for X offset) and bottom-aligned (for Y offset).

 -100%: Left-aligned (for X offset) and top-aligned (for Y offset).

APPEARANCE

 Line Style: Select one of the following line styles: Solid, Dashed, or Bracket.

 Color: Select the color that has the highest contrast to the scene. The default is White.

 Opacity: Set the guide opacity. Available options are 0%, 25%, 50%, 75% and 100%.

RELATIVE TO FRAME GUIDE

Select the Relative to Frame Guide check box to size and position the guide relative to (and have it bounded by)

the Frame Guide instead of the record format.

NOTE: The Relative to Frame Guide check box is available on the Action Guide and Title Guide tabs.

GENERAL TAB

Enable/Disable and select the location (Relative To), color, and opacity of the following elements:

 Center: The center crosshair.

 Grid: Rule-of-thirds grid.

 Shading: The shaded region outside of the area of interest.

TEST SIGNAL

Use the Test Signal menu to replace the video monitor outputs with one of the following video test patterns:

 Chip Chart

 SMPTE Bars

 Luma

To enable a test signal, select the test signal box. To exit, tap the touchscreen or press the Enter or Menu button

on the DSMC Side Handle or REDMOTE.

If needed, enable an Audio Tone.

NOTE: Test signals are not recordable; they are provided to help align external HD-SDI and HDMI monitors.

REDCAST

The REDCAST menu is only accessible when a REDCAST Module is installed. For more information, see the

REDCAST Module Operation Guide, available at www.red.com/downloads.

LOOK

The Look menu includes: Color, Gain, ISO/FLUT, Sharpness, Curves, Color/Gamma, Color Temperature, and

LGG (Lift, Gamma, Gain).

The Look settings affect the look of the monitor path, but do not affect the recorded RAW data.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General