Renesas R8C/20 User Manual

R8C/20 Group, R8C/21 Group 20. Electrical Characteristics
Rev.2.00 Aug 27, 2008 Page 415 of 458
REJ09B0250-0200
NOTES:
1. V
CC = 2.7 to 5.5 V, VSS = 0 V at Topr = -40 to 85°C (J version) / -40 to 125°C (K version), unless otherwise specified.
2. 1t
CYC = 1/f1(s)
Table 20.12 Timing Requirements of Clock Synchronous Serial I/O with Chip Select
(1)
Symbol Parameter Conditions
Standard
Unit
Min. Typ. Max.
t
SUCYC SSCK clock cycle time 4 −−
tCYC
(2)
tHI SSCK clock “H” width 0.4 − 0.6 tSUCYC
tLO SSCK clock “L” width 0.4 − 0.6 tSUCYC
tRISE SSCK clock rising time Master −− 1
t
CYC
(2)
Slave −− 1 µs
t
FALL SSCK clock falling time Master −− 1
t
CYC
(2)
Slave −− 1 µs
t
SU SSO, SSI data input setup time 100 −−ns
t
H SSO, SSI data input hold time 1 −−
tCYC
(2)
tLEAD
SCS setup time
Slave 1t
CYC + 50 −−ns
t
LAG
SCS hold time
Slave 1t
CYC + 50 −−ns
t
OD SSO, SSI data output delay time −− 1
t
CYC
(2)
tSA SSI slave access time −−1tCYC + 100 ns
t
OR SSI slave out open time −−1tCYC + 100 ns

Renesas R8C/20 Specifications

General

Brand	Renesas
Model	R8C/20
Category	Control Unit
Language	English