Renesas R8C/20 User Manual

C - 9
REVISION HISTORY R8C/20 Group, R8C/21 Group Hardware Manual
0.20 Jun 28, 2006 300 16.2.5.4 Data Transmission/Reception;
“16.2.5.4 Data Transmit/Receive ” → “ 16.2.5.4 Data Transmission/
Reception
” revised.
16.2.5.4 Data Transmission/Reception, on the 5th line from the bottom;
“ When setting the ~ transmit is enabled. ” deleted.
301 Figure 16.17 Sample Flowchart of Data Transmission/Reception (Clock
Synchronous Communication Mode)
revised.
304 16.2.6.2 Data Transmission;
“16.2.6.2 Data Transmit ” → “ 16.2.6.2 Data Transmission ” revised.
16.2.6.2 Data Transmission, on the 9th line from the bottom;
“ When setting the ~ transmit is enabled. ” deleted.
306 16.2.6.3 Data Reception;
“16.2.6.3 Data Receive ” → “ 16.2.6.3 Data Reception ” revised.
309 16.2.8 Notes on Clock Synchronous Serial I/O with Chip Select;
“16.2.8 Precautions on Clock Synchronous Serial I/O with Chip Select ” →
“
16.2.8 Notes on Clock Synchronous Serial I/O with Chip Select ” revised.
338
Figure 16.46
Example of Register Setting in Master Transmit Mode (I
2
C
Bus Interface Mode)
;
“ Figure 16.46 Example of Register Setting in Master Transmit Mode
(Clock Synchronous Serial)” → “
Figure 16.46 Example of Register
Setting in Master Transmit Mode (I
2
C Bus Interface Mode)” revised.
339
Figure 16.47
Example of Register Setting in Master Receive Mode (I
2
C
Bus Interface Mode)
;
“ Figure 16.47 Example of Register Setting in Master Receive Mode
(Clock Synchronous Serial)” → “
Figure 16.47 Example of Register
Setting in Master Receive Mode (I
2
C Bus Interface Mode)” revised.
340
Figure 16.48
Example of Register Setting in Slave Transmit Mode (I
2
C
Bus Interface Mode)
;
“ Figure 16.48 Example of Register Setting in Slave Transmit Mode
(Clock Synchronous Serial)” → “
Figure 16.48 Example of Register
Setting in Slave Transmit Mode (I
2
C Bus Interface Mode)” revised.
341
Figure 16.49
Example of Register Setting in Slave Receive Mode (I
2
C
Bus Interface Mode)
;
“ Figure 16.49 Example of Register Setting in Slave Receive Mode
(Clock Synchronous Serial)” → “
Figure 16.49 Example of Register
Setting in Slave Receive Mode (I
2
C Bus Interface Mode)” revised.
342
16.3.8 Notes on I
2
O Bus Interface;
“ 16.3.8 Precautions on I
2
O Bus Interface ” → “ 16.3.8 Notes on I
2
O Bus
Interface
” revised.
343 to 385 17. Hardware LIN;
“ Sync ” → “ Sync h” revised.
345 Figure 17.2 LINCR Register revised.
346 Figure 17.3 LINST Register revised.
Rev. Date
Description
Page Summary

Renesas R8C/20 Specifications

General

Brand	Renesas
Model	R8C/20
Category	Control Unit
Language	English