www.resourcedm.com
Revision 2.3 Page 25 of 72
Commissioning & Service Guide DMTouch
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
This will then take you to the ‘Item Matching Setup’ page. From here, select which items should be matched to the category then click on
‘Set Item matching’;
When matched, the DMTouch will use them and display them accordingly. For example in the device list or mimics;
Network
Network Errors
From the Service menu, follow; Devices - Network – Network
Errors.
Network errors are now shown for RS485 and IP controllers.
This screen accumulates the errors from the time the DM is
powered on. The screen can be cleared to zero so that new
errors can be observed, by restarting the DM.
Note: Offline and Online errors relate to RS485 controllers only.
Data errors are shown for both IP and RS485 controllers.
To Next Page
Loading...
Need help?
General