www.resourcedm.com
Revision 2.3 Page 29 of 72
Commissioning & Service Guide DMTouch
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Device Information
Case Setup
Device information allows the user to see: -
Type Number
Software Version
CRC
Bitswitch settings
Network Address
Network ID
Note: If the device is showing in red, then the unit is ‘offline’
and no information will be shown/ updated.
From the Service screen, go to Devices - Case Setup
This will take you to the following screen
Select the case to setup by pressing it.
To Next Page
Loading...