To Next PageTo Next Page
Need help?Do you have a question about the Resource Data Management DMTouch and is the answer not in the manual?
General| Type | Control Panel |
|---|---|
| Resolution | 800 x 480 pixels |
| Power Supply | 24 VDC |
| Operating System | Linux |
| Storage | 4 GB Flash |
| Enclosure Rating | IP65 |
| Communication | Ethernet |
| Processor | ARM Cortex A8 |
| Connectivity | USB, Ethernet |
| Screen Size | 7 inch |
| Operating Temperature | 0°C to 50°C |
Overview of the DMTouch main display, showing system status and devices.
Describes the function of touch screen buttons for navigating the DMTouch interface.
Allows users to add comments to specific alarms after logging in.
Displays individual alarm actions for each alarm within a selected controller.
Sets up warnings for successive defrosts that terminate on time.
Allows acceptance of all outstanding alarms on the DMTouch in one action.
Configures individual device parameters, with options to lock them.
Lists selected parameters for multiple devices and allows changes to update them.
Sets aliases for devices, allowing more meaningful names than default IDs.
Allows setting aliases for individual items (inputs/outputs) on devices.
Controls the visibility of inputs, outputs, or parameters based on user access level.
Displays errors for RS485 and IP controllers, accumulating data since DM restart.
Connects Modbus® devices using a USB/RS485 adapter, detailing configuration steps.
Calculates and displays product temperature based on probe data and time constants.
Allows modification of existing split device configurations without re-splitting.
Example mimic diagram for a coldroom, showing device status and values.
Example mimic diagram for a case, showing device status and values.
Example mimic diagram for a probe, showing temperature and alarm status.
Example mimic diagram for an energy meter, showing consumption data.
Sets up individual inputs, defining type, mode, and alarm parameters.
Configures outputs such as relays for alarm or timer functions.
Displays a list of users and allows modification of their details if logged in with sufficient access.
Deletes existing user accounts from the DMTouch system.
Sets temporary or timed elevation of user access levels.
Tracks user login history, including last login and login count.
Prevents service level logins from changing parameters.
Restricts viewing access to the DMTouch front end and web interface.
Requires username and password for service menu access.
Sets the period for data thinning to manage storage space.
Saves the current DMTouch site configuration to a file or internally.
Restores a previously saved DMTouch site configuration.
Displays enabled DMTouch features and Modbus TCP/USB interface information.
Configures pack controllers for energy saving optimization.
Provides detailed diagnostics for night blind check failures or passes.
Performs a basic check on night blind usage and alerts for failures.
Selects temperature probe sources for condenser monitoring.
Selects data sources for calculating case performance figures.
Configures trim control settings for humidity or dewpoint based operation.
Defines sources for mullion temperature readings used in dewpoint control.
Displays the last 100 system entries, with filtering options.
Shows the current software version and any fitted expansion board information.
Lists device Mac address, IP address, and expiry time.
Shows the status of consoles and their network details attached to the DMTouch.
Displays transmit and receive information for different network interfaces.
Restricts layout viewing access by user level, web CGI, front panel, and consoles.
Restarts the DMTouch system.
Saves system information to a file for troubleshooting.
Manually sets the current date and time for the DMTouch.
Configures network interface settings for the DMTouch.
Programs General Purpose timer channels for master or slave operation.
Maps devices to specific defrost timer channels or sets them to automatic.
Sets temperature limits for shuttle data, triggering alarms if limits are exceeded.
Allows graphing of data saved from a shuttle to the DMTouch.
