Fig. 6-1: Process data default configurations
The set of allowed functions codes for input and output process da-
ta is contained at [b8.61] and [b8.62] respectively. Maximum sup-
ported input and output process data length is 30 bytes, each.
Hence, as current supported process data function codes are all two
bytes in data length, maximum number of configurable function co-
des is 15.
● Following the instructions of the EDS installation tool to import the file into
the RSLogix. See the item in below picture.
Fig. 6-2: Device catalog
● Select MEP XFC and click “Create”, then type Name and IP Address in the fol-
lowing interface.
Bosch Rexroth AG
EtherNet/IP
Multi-Ethernet Card
24/61
DOK-RCON0*-XFCX610*MUL-IT02-EN-P
To Next Page
Loading...
