7.3 Acyclic Communication
The MEP with SERCOS III supports two channels for object exchange: SERCOS
service channel and SERCOS/IP.
When accessing frequency converter parameters via service channel, the func-
tion blocks IL_SIIISvcRead and IL_SIIISvcWrite shall be used.
When parameter write access on the two bytes type parameter, any
values exceeding 65,535 (0xFFFF) will be reduced automatically to a
two bytes value. If the reduced two bytes value is in the valid range,
then it will be accepted without sending value exceed limits indica-
tion.
Bosch Rexroth AG
SERCOS III
Multi-Ethernet Card
34/61
DOK-RCON0*-XFCX610*MUL-IT02-EN-P
To Next Page
Loading...
