7.4 Example
An example with XLC L65 is shown below.
● Creating project in IndraWorks Engineering Suite 14V10, add XLC65 into the
project and configure the interface of SERCOS master.
Compatibility mode must be matched with XLC / MLC firmware ver-
sion!
Fig. 7-3: Creating project in IndraWorks_1
Multi-Ethernet Card Bosch Rexroth AG
SERCOS III
DOK-RCON0*-XFCX610*MUL-IT02-EN-P
35/61
To Next Page
Loading...
