1 Safety Instruction
The Safety Instructions in the available application documentation contain spe-
cific signal words (DANGER, WARNING, CAUTION or NOTICE) and, where re-
quired, a safety alert symbol (in accordance with ANSI Z535.6-2011).
The signal word is meant to draw the reader's attention to the safety instruction
and identifies the hazard severity.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words DANGER, WARNING and CAUTION, is used to alert the reader
to personal injury hazards.
In case of non-compliance with this safety instruction, death or serious injury
will occur.
In case of non-compliance with this safety instruction, death or serious injury
could occur.
In case of non-compliance with this safety instruction, minor or moderate injury
could occur.
In case of non-compliance with this safety instruction, property damage could
occur.
Do not attempt to install and operate the components of the electric drive and
control system without first reading all documentation provided with the prod-
uct. Read and understand these safety instructions and all user documentation
prior to working with these components. If you do not have the user documenta-
tion for the components, contact your responsible Bosch Rexroth sales partner.
Multi-Ethernet Card
Bosch Rexroth AG
Safety Instruction
DOK-RCON0*-XFCX610*MUL-IT02-EN-P
1/61
To Next Page
Loading...
