2-2 Important directions for use Rexroth IndraDyn A
Areas of use and application
Asynchronous motors of the IndraDyn A line made by Bosch Rexroth are
designed to be used as rotary main-spindle and servo-drive motors.
Typical applications are in:
• machine tools,
• printing and paper processing machines,
• packaging and foodstuff machines and
• metal-forming machine tools.
Several types of motors with differing drive power and different interfaces
are available for application-specific uses.
Control and monitoring of the motors may require additional sensors and
actors.
Note: The motors may only be used with the accessories and parts
specified in this document. If a component has not been
specifically named, then it may not be either mounted or
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Every drive controller has to be programmed before starting it up, making
it possible for the motor to execute the specific functions of an application.
The motors may only be operated under the assembly, installation and
ambient conditions as described here (temperature, IP-Class, humidity,
EMC requirements, etc.) and in the position specified.
2.2 Inappropriate use
Inappropriate use is defined as using the motors outside of the above-
referenced areas of application or under operating conditions other than
described in the document and the technical data specified.
IndraDyn A motors may not be used if
• they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
• Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safety
Guidelines!
To Next Page
Loading...
Need help?
General
