SERVICE RAM ADDRESSES 14 June, 2002
5-94
4000F9(H) - User parameter switch 09
Bits 0 and 1: Memory lock
Bit 1 0 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this
feature are kept in the memory until a memory lock ID is
entered.
1 1 Faxes from senders whose RTIs/CSIs are not specified for
this feature are kept in the memory until a memory lock ID is
entered.
Bits 2 and 3: Tx/Rx file save
(optional 40M Memory and the function upgrade card required)
Bit 3 2 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for
this feature kept in the hard disk for filing.
1 1 Faxes from senders whose RTIs/CSIs are not specified for
this feature are kept in the hard disk for filing.
Bit 4: Store fax documents for the Memory Transmission while using the manual
dial function 0: Disabled, 1: Enabled
Bit 5:
Bit 6: Requires the user to press the “Add” key when specifying destination with
Quick Dial. 0: Off, 1: On
Bit 7: Output method for multiple sets 0: Stack, 1: Sort
4000FA(H) - User parameter switch 10 (SWusr_0A)
Bit 0: Not used
Bit 1: 2 in 1 0: Disabled, 1: Enabled
Bit 2: Image Rotation 0: Disabled, 1: Enabled
Bit 3: Page Reduction 0: Disabled, 1: Enabled
Bit 4: Rotate Sort 0: Disabled, 1: Enabled
Bit 5: Usage the optional Bypass Feeder
0: Multi purpose, 1: Printer only
Bit 6: Not used
Bit 7: Halftone type 0: Error diffusion, 1: Dither
4000FB(H) - User parameter switch 11 (SWusr_0B)
Bit 0: Transfer request using DTMF tone signals 0: Not accepted, 1: Accepted
Bit 1: Method of transmitting numbers after the "Tone" mark over an ISDN line
0: UUI, 1: Tone
Bit 2: Alarm for the Blank Sheet Detect function 0: Off, 1: On
Bits 3 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station
0: Off, 1: On
Bit 7: Polling Standby duration 0: Once, 1: No limit
To Next Page
Loading...
