Ricoh 5510L - Page 217

14 June, 2002 SERVICE RAM ADDRESSES
5-95
Service
Tables
4000FC(H) - User parameter switch 12 (SWusr_0C)
Bits 0 to 2: Not used
Bits 3 and 4: Printout image density (Fax mode)
Bit 4 3 Setting
0 0 Normal
0 1 Lighten
1 0 Darken
1 1 Not used
Bits 5 to 6: Not used
Bit 7: Copy operation 0: Possible, 1: Prohibited
4000FD(H) - User parameter switch 13 (SWusr_0D)
Bits 0 and 1: PSTN-1 access method from behind a PABX
Bit 1 0 Setting
0 0 PSTN
0 1 Extension (Loop start)
1 0 Extension (Ground start)
1 1 Extension (Flash start)
Bits 2 and 3: PSTN-2 access method from behind a PABX
Bit 1 0 Setting
0 0 PSTN
0 1 Extension (Loop start)
1 0 Extension (Ground start)
1 1 Extension (Flash start)
Bits 4 and 5: Not used
Bit 6: Action when the received Higher Layer Capabilities is Tel or Bearer
Capabilities is Speech
(This switch is not listed on the User Parameter List.)
0: Do not respond to the call
1: Respond to the call
Bit 7: Not used
4000FE(H) – User parameter switch 14 (SWusr_0E)
Bits 0 to 7: Not used
4000FF(H) – User parameter switch 15 (SWusr_0F)
Bits 0 to 7: Not used.