Reception Features
94
5
Routing e-mail received via SMTP
E-mail received via SMTP can be routed to other fax machines. It can also be
routed to single or group destinations programmed in the destination list.
Preparation
Before routing e-mail received via SMTP, you first must set “SMTP RX File
Delivery Settings” to “On”. See p.148 “E-mail Settings”.
Limitation
❒ Depending on security settings, this function may not be available.
Note
❒ If an e-mail transfer request is received when the “SMTP RX File Delivery Set-
tings” is “Off”, this machine responds with an error message to the SMTP
server.
❒ You can make settings that limit transfer to specified originators. See p.148
“E-mail Settings”.
❒ Using this function, you can also send documents from your e-mail applica-
tion to e-mail addresses and G3 fax machines' destinations through this ma-
chine simultaneously. For details about specifying the destinations of fax
machines, see the following.
AJA007S
To Next Page
Loading...
