Using Administrator Settings
193
9
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Administrator Tools].
D
Press [Program Confidential ID].
E Enter an ID using the number keys,
and then press [OK].
Note
❒ A Confidential ID can be any
four-digit number, except 0000.
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key be-
fore pressing [OK], and then try
again.
To cancel programming an ID, press
[Cancel]. The display returns to
that of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.
Programming a Polling ID
Program a Polling ID to use the Trans-
fer Request, Transfer Station, Default
ID Polling Transmission, and Default
ID Polling Reception functions. When
you use ID Transmission, program
the same ID as the one programmed
on the sender's machine.
Reference
p.11 “Polling Transmission”
p.14 “Polling Reception”
p.52 “Transfer Request”
p.76 “Selecting transmission op-
tions for a single transmission”
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Administrator Tools].
D Press [Program Polling ID].
E Enter an ID using the number keys
and [A] to [F], and then press [OK].
To Next Page
Loading...
