Using Administrator Settings
167
9
User Parameters
User Parameters allow you to customize various settings to suit your needs.
To change function settings, set the User Parameter Switches.
❖ Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are “0” or “1”. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between “0” and “1”.
❖ User Parameter List
User Parameter Switches are outlined in the following table.
Switch
02
00111011
pppppppp
76543210
Switch Bit Item 0 1
02 0 Forwarding Mark Off On
3TSI Print Off On
03 0 Automatic printing of the
Communication Result Re-
port
Off On
2 Automatic printing of the
Memory Storage Report
Off On
3 Automatic printing of the
Polling RX Reserve Report
Off On
4 Automatic printing of the
Polling RX Result Report
Off On
5 Automatic printing of the Im-
mediate TX Result Report
Off On
6 Automatic printing of the
Polling TX Clear Report
Off On
7 Automatic printing of the
Journal
Off On
To Next Page
Loading...
