Specifications
213
11
-Paper size and scanned area
❖ Exposure Glass
❖ ADF
Limitation
❒ There may be a difference in the size of the image when it is printed at the des-
tination.
❒ If you place an original larger than A3, 11"u17" on the exposure glass, only an
A3, 11"u17" area is scanned.
Note
❒ Even if an original is correctly placed on the exposure glass or in the ADF, a
margin of 3 mm (0.1") around each edge of the original may not be sent.
❒ If the receiver uses paper of a smaller width than the original, the image is re-
duced to fit that paper. See p.75 “Auto Reduce”.
AAG019S
To Next Page
Loading...
