Ricoh Aficio 3045 - ECM (Error Correction Mode)

Administrator Setting
166
9
ECM (Error Correction Mode)
If part of a transmission fails because
of a line problem, the lost data is auto-
matically resent. For this function to
work, the other machine must have
ECM. You can turn this function on or
off through the following procedure.
Limitation
❒ This function is not available with
Internet Fax.
Note
❒ If you turn ECM off, you cannot
use the following functions:
•JBIG Transmission
• Super G3 Communication
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Administrator Tools].
D Press [ECM].
E Select [On] or [Off], and then press
[OK].
Note
❒ To cancel this setting, press [Can-
cel]. The display returns to that
of step
D
.
F Press the {User Tools/Counter} key.
The standby display appears.