17
2. Checking and Canceling
Transmission Files
After you have pressed the {Start} key (after scanning originals), you can check
and edit the destination or settings of Memory Transmission. You can also can-
cel a transmission, change the settings of a transmission, print a stored file, print
a list of stored files, and resend a file which the machine failed to transmit.
• Memory Transmission
• Internet Fax Transmission
•Send Later
• Sender Settings
•Priority Transmission
• Confidential Transmission
• Polling Reception
• Polling Transmission
• Transfer Request
Note
❒ If there are no files being sent, or stored by Memory Transmission, [Change /
Stop TX File] does not appear on the display.
❒ You cannot check or edit a file being sent. Also a Confidential Transmission
file or stored file to be printed as a report cannot be checked or edited.
❒ There are cases when a destination may not be selected as the destination ap-
pears as “*”, depending on the security settings.
To Next Page
Loading...
