Reception Functions
89
5
Transfer Result Report (transfer request
by e-mail)
When this machine receives a transfer
request by e-mail, the Transfer Result
Report is sent by e-mail to the Re-
questing Party after completing all
transmissions to the specified Trans-
fer Stations. If the Administrator's e-
mail address is programmed, the
Transfer Result Report e-mail is for-
warded to that address.
Note
❒ “Unprogrammed” indicates that
the document could not be sent be-
cause the end receiver's address is
incorrect or not programmed.
❒ “--” indicates that the Internet Fax
document was sent to the mail serv-
er programmed in this machine.
❒ When using multistep transfer, the
Transfer Result Report e-mail is
sent to the last Transfer Station that
sent Transfer Request.
To Next Page
Loading...
