Advanced Features
49
4
Advanced Features
SUB Code
Normally you can only use Confidential
Transmission to send documents to
fax machines of the same manufactur-
er that have the Confidential Recep-
tion function. See p.9 “Confidential
Transmission”. However, if the other
machine supports a similar function
called “SUB Code”, you can send fax
documents to the other party using
this method instead.
For details about the SUB Code, see
p.181 “Box Settings”.
Limitation
❒ A SUB Code cannot be used with
Internet Fax.
Note
❒ The ID can be up to 20 digits long.
❒ You can enter numbers, *, #, and
spaces to program an ID.
❒ Make sure the number of digits in
the ID matches the specification of
the machine to which you are send-
ing.
❒ You can store IDs in the destina-
tion list and Programs. See “Fax
Destination”, General Settings
Guide. See p.129 “Registering and
Changing Keystroke Programs”.
❒ The SUB Code is printed on all re-
ports. This is possible only if the
SUB Code is specified in [Adv. Fea-
tures] using the number keys.
A Place the original, and then select
the scan settings you require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.34 “Scan Settings”, Facsimile
Reference <Basic Features>
B Enter the fax number of a destina-
tion or an IP-Fax destination.
C Press [Adv. Features].
D Press [SUB Code].
E Press [TX SUB Code].
F Enter a SUB Code, and then press
[OK].
“SUB Code” appears one line above
[Adv. Features] on the display.
Note
❒ If you make a mistake, press [Can-
cel] or the {Clear/Stop} key before
pressing [OK], and then try again.
To Next Page
Loading...
