Using Administrator Settings
159
9
Changing a file
A Check [Program / Change] is se-
lected.
B Select the file you want to change.
The “
A file is already
stored. If another file is
stored, previous one will
be deleted. Is it OK?
” mes-
sage is shown.
C Press [Store].
If you want to cancel storing,
press [Do not Store].
Changing only a file name
A Press [Change Name].
B Select the file whose name you
want to change.
C Enter a file name, and then press
[OK].
Reference
“Entering Text”, General Set-
tings Guide
Proceed to step
H
.
F Place the original, and then select
any scan settings you require.
Note
❒ You can also specify a scan size.
See p.17 “Setting a Scan Area”,
Facsimile Reference <Basic Fea-
tures>.
G Press the {Start} key.
The machine starts to scan and
completes scanning.
Note
❒ To cancel scanning, press [Stop
Scanning].
H Press [Exit].
I Press the {User Tools/Counter} key.
The standby display appears.
Deleting an Auto Document
Note
❒ You cannot delete an Auto Docu-
ment waiting to be transmitted.
Delete it after the transmission or
cancel the transmission, and then
delete the Auto Document.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Administrator Tools].
D Press [Store / Change / Delete Auto Doc-
ument].
To Next Page
Loading...
