Ricoh Aficio 3045 - Registering or Changing a Gateway

Facsimile Features
152
8
C Enter the IP address and SIP user
name, and then press [OK].
The screen returns to that of step
B
.
D Press [OK].
Registering or changing a gateway
A Press [Program / Change / Delete Gate-
way].
B Check that [Program / Change] is se-
lected.
C Press a gateway to register.
When registering a new gateway,
press [*Not Programmed].
D Press [Change] for [Prefix].
E Enter the Prefix using the number
keys, and then press [OK].
Note
❒ To change the existing prefix, press
[Clear], and then enter a new pre-
fix.
❒ For documents sent using a gate-
way to G3 Fax, prefixes can be
used. If the first several digits of
IP-Fax number and the gate-
way-specific prefix are identical,
documents can be transmitted
using the registered digits of the
gateway. For example, if both
03 and 04 have been registered
as gateway number while
0312345678 is also specified,
documents can be transmitted
via a gateway for which 03 is
used as a prefix.
❒ When you wish to use the gate-
ways regardless of the IP-Fax
destination numbers, register
only the gateway addresses with-
out registering the prefix.