Other Transmission Features
80
4
Simultaneous Broadcast
The optional extra G3 interface unit is re-
quired.
The Standard Broadcast function
sends faxes one at a time to multiple
destinations in the order of specified
destinations.
However, the Simultaneous Broad-
cast function can simultaneously
send faxes to multiple destinations
using different lines.
This results in a shorter overall trans-
mission time.
Note
❒ A maximum of three simultaneous
transmissions (including LAN) are
possible.
❒ When using the optional extra G3
interface unit, if you set the line se-
lection as “G3 Auto” beforehand,
the machine will use whichever G3
line is not busy. This increases effi-
ciency.
JBIG Transmission
If you use JBIG (Joint Bi-level Image
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion.
Reference
p.35 “Original Type”, Facsimile Ref-
erence <Basic Features>
Limitation
❒ You can only use this function on a
telephone line.
❒ This function requires that the oth-
er party's fax machine has both the
JBIG function and ECM function
(G3 communication only).
Note
❒ If ECM is turned off, JBIG Trans-
mission is unavailable. See p.166
“ECM (Error Correction Mode)”.
To Next Page
Loading...
