Transmission Mode
4
1
D Enter the time using the number keys
and select [AM] or [PM]. Then press
[OK].
The specified time is shown above
the highlighted [Send Later].
Note
❒ Press [Economy Time] to specify
the economy time.
❒ When entering numbers small-
er than 10, add a zero at the be-
ginning.
❒ If you make a mistake, press [Clear]
or the {Clear/Stop} key before
pressing [OK], and then try again.
❒ To cancel Send Later, press [Can-
cel]. The display returns to that
of step
C
.
E Press [OK].
The standby display appears.
Note
❒ To check the settings, press [Trans-
mission Mode].
F Specify a destination, and then press
the {Start} key.
Note
❒ You can cancel the transmission
setup for Send Later. See p.19
“Canceling a Transmission”.
To Next Page
Loading...
