Accessing User Tools (Facsimile Features)
149
8
Note
❒ When e-mail exceeds the maxi-
mum file size, an Error Report is
output, and the e-mail is deleted.
❒ Even when e-mail does not ex-
ceed the size limit, it may be re-
jected if it does not meet the
requirements of the server set-
tings.
A Press [On].
B Enter the maximum e-mail size
using the number keys.
Note
❒ Maximum e-mail size can be
between 64 and 102,400 KB.
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key,
and then enter again.
C Press [OK].
❖ SMTP RX File Delivery Settings (SMTP
Reception File Delivery Settings)
This function is available on sys-
tems that allow routing of e-mail
received via SMTP. See p.94 “Rout-
ing e-mail received via SMTP”.
•On
•Off
When an authorized e-mail ad-
dress is set, e-mail received from
addresses that do not match the
authorized address is discarded,
and an error message is returned
to the SMTP server.
The authorized e-mail address is
compared with the addresses of e-
mail originators, as illustrated by
the following examples.
When the authorized e-mail ad-
dress is set to “@aaa.abcd.com”:
abc@aaa.abcd.com - accepted
def@aaa.xyz.com - not accepted
abc@abcd.com - not accepted
Note
❒ No Error Report is output even
when e-mail is discarded.
A Press [On].
B Press [Change], and then enter
the sending e-mail address with
transmission permission.
Note
❒ If you make a mistake, press
[Backspace] or [Delete All], and
then enter again.
C Press [OK] twice.
To Next Page
Loading...
