Transmission Mode
10
1
Default ID
A Check that [Default ID] is select-
ed, and then press [OK].
Note
❒ To cancel Confidential Trans-
mission, press [Cancel]. The
display returns to that of step
C
.
Override ID
A Select [ID Override].
B Enter the Confidential ID (4-digit
number) using the number keys,
and then press [OK].
“ID Override: ” and the entered
Confidential ID are shown above
the highlighted [Confidential TX].
Note
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and then
try again.
❒ To cancel Confidential Trans-
mission, press [Cancel]. The
display returns to that of step
C
.
E Press [OK].
The standby display appears.
Note
❒ To check the settings, press [Trans-
mission Mode].
F Specify the destination, and then
press the {Start} key.
Note
❒ You can cancel the transmission
setup for Confidential Transmission.
See p.19 “Canceling a Transmis-
sion”.
To Next Page
Loading...
