Other Transmission Features
64
4
See p.79 “Transmission with Im-
age Rotation”
❒ This function is only available with
Memory Transmission.
❒ This function is only available with
the ADF.
❒ You can confirm whether both sides
were properly scanned using the
Stamp function. See p.73 “Stamp”.
❒ You can program one of the Quick
Operation keys with operations for
this function. Using the quick oper-
ation keys allows you to omit step
B. See p.145 “General Settings/Ad-
justment”.
A Place the original in the ADF, and
then select the scan settings you
require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.34 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press [Sub TX Mode].
C Press [2 Sided Original].
D Specify the original position.
Check the orientation of the placed
document, and then press or
.
Note
❒ Make sure that the specified orig-
inal position matches the orien-
tation of originals loaded in the
ADF.
E Specify the page opening orienta-
tion from [Top to Top] or [Top to Bot-
tom].
GHPY030E
To Next Page
Loading...
