5127 1 Enables or disables the APS mode..
5501* PM Alarm Interval (Printout) [0 to 9999 / 0 / 0K copies/step]
5501 1 Specifies when the PM alarm occurs.
5801 Memory Clear
5801 2 Engine ( Memory Clear)
5802 Machine Free Run
5802 1
Starts a free run of both the scanner and the printer. Press "ON" to start; press "OFF" to
stop.
5803
Input Check
( Input Check (SP 5803))
5804
Output Check
( Output Check (SP 5804))
5807* Area Selection
5807 1
Selects the display language group.
1 = Japan, 2 = North America, 3 = Europe, 4 = Taiwan, 5 = Asia,
6 = China, 7 = Korea
SP 5807 1 is not cleared by SP 5801 2 ( Memory Clear).
5810* SC Code Reset
5810 1
Resets all level-A service call conditions, such as fusing errors. If the reset is successful, the
display shows "Completed." If the reset fails, an error message shows.
5811* Serial Num Input
5811 1 Setting Sets the machine serial number. FA
5811 3 ID 2 Code Display Displays the ID 2 Code (used for NRS
SP Mode Tables
39
To Next Page
Loading...
