Ricoh Aficio MP 3500SP - Setting SEP Codes for Reception

Transmission
96
1
Setting SEP Codes for Reception
Normally you can only use Polling Reception to receive faxes from machines
that have the Polling Reception function and the same manufacturer. However,
if a machine of another manufacturer supports Polling Reception, you can re-
ceive fax documents from the other party using this method instead.
You can receive documents that have the same SEP Code as the SEP Code you
entered. For details about the SEP Code, see “Box Settings” in “Facsimile Fea-
tures”, General Settings Guide.
Important
❒ A SEP Code cannot be used with Internet Fax.
A Enter the fax number of a destination or an IP-Fax destination.
B Press [Adv. Features].
C Press [SEP Code].
D Press [RX SEP Code].
E Enter a SEP Code, and then press [OK].
“SEP Code” appears one line above [Adv. Features] on the display.
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
F When a password is required, press [Password (PWD)], enter the password
using the number keys, and then press [OK].
G Press [Exit].