Canceling a Transmission
107
1
Before the Transmission Is Started
Use this procedure to cancel a transmission after the original is scanned.
This function is useful to cancel a transmission when you notice a mistake in des-
tination or with the originals after storing. To cancel Memory Transmission,
search for the file to be canceled among the files stored in memory, and then de-
lete it.
You can cancel transmission of a file while the file is being sent, stored in mem-
ory, or fails to transmit. All the scanned data is deleted from memory.
Important
❒ This function is unavailable with Immediate Transmission.
A Press [Change / Stop TX File].
The list of stored files being transmitted or waiting for transmission appears.
B Select the file you want to cancel.
If the desired file is not shown, press [UPrev.] or [TNext] to find it.
To display only the files being sent, press [Files under TX].
There are cases when a destination may not be selected as the destination ap-
pears as “p”, depending on the security settings.
To Next Page
Loading...
