Specifying a Destination
65
1
Sending to an E-mail Address
This section explains how to specify an e-mail address as a destination.
When using Internet Fax transmission, specify the e-mail address in place of the fax number.
Important
❒
In the destination list, register senders, specify their e-mail addresses, and set Use Name
as
[
Sender
]
in advance using “Address Book Management” in “System Settings”.
❒ Internet Fax is executed in only Memory Transmission that starts transmis-
sion automatically after storing documents in memory. If you specify Imme-
diate Transmission in Internet Fax, the mode is switched to Memory
Transmission while an e-mail address is being entered.
A Press to switch the destination to e-mail address.
B Specify the sender.
For details about specifying senders, see “Sender Settings”.
C Press [Manual Input].
To select a destination from the Address Book, see “Using the Address Book
to Specify Destinations”.
To Next Page
Loading...
Need help?
General
